Winding Technology - PAC 45 and PAC 50
- Stretch Film & Small Diameters
- Flat & Embossed Films
- CPP/BOPP Films
- Blown Film
- General Purpose: Single & Duplex Turret Winders - Models 1000,1050, 1150, 1480, 1580
- Horizon Series Single & Duplex Turret Winders - Models 1200, 1250, 1400, 1450, 1500, 1600
- Surface Winders - Pac 60
- Surface Winders - Pac 45 & PAC 50
- Blown Stretch Film - Model 1700
- Agricultural Film Winder
- Construction Film - Model 1650
- Tec-2 Winder
PAC 45 and PAC 50 Blown Film Surface Winders
The PAC 45 surface winder is capable of 40-inch (1,016mm) roll diameters and the PAC 50 is capable of 50-inch (1,270mm) roll diameters. The PAC 45 features a pneumatically actuated assembly that loads the winding roll horizontally against the winding drum through roll build-up. An optional unloading assembly is available to lower the finished roll to the floor. The PAC 50 pivots the winding roll through a hydraulically operated pressure arm assembly to control a force range between the large winding drum and the winding roll of the film during build-up. Additionally, the PAC 50 can be equipped with a center drive for heavy slippery materials.
Highlights of PAC 45 and PAC 50:
- Transducer is standard on the PAC 50.
- Dancers on the PAC 45 with AC drives.
- Automatic cut/transfer systems.
- Accessible operator controls.
- Expander rolls and slitter stations.
